1 / 6
Carbon Filter Holder for Kotto Solder Smoke Absorber — image 1
1 / 6

Carbon Filter Holder for Kotto Solder Smoke Absorber

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement holders for the carbon filter in a Kotto "Solder Smoke Absorber".

Rating
0 / 5
Likes
6
Downloads
13
Makes
0
Views
221
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Here are two replacement holders for the carbon filter in a Kotto "Solder Smoke Absorber" - the model with a flexible hose. The first one is a straight replacement for the cardboard holder that comes with the unit, but with some tabs that project upwards to make it easier to remove from the machine.

The second version is an attempt to redesign the holder so that the air will flow more evenly through the entire cross section of the carbon filter and use the filter more evenly. (I noticed that the original design tends to concentrate the air flow in the middle of the filter, so that it would probably need to be replaced sooner.) This new design has not been tested enough to confirm that it is better than the original.

Update: There is still too much air going through the centre of the filter with V2. I'm now trying a 3rd version with tiny holes in the middle growing larger to the outer edge.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

**Rafts:**

No

Supports:

No

**Resolution:**

200

Infill:

15

**Filament:** Prusament PLA

Category: Parts

Tags