1 / 1
Prusa Mini LCD Cover with USB and Power Switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a modified version to accommodate backplate since it was not fitting right and USB stopper was too thick.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 152
- Makes
- 4
- Views
- 1,402
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This a modified version to accommodate backplate since it was not fitting right and USB stopper was too thick. Also you can use it with this plate wich have new opening so the MB can breathe :D
https://www.prusaprinters.org/prints/98723-prusa-mini-back-lcd-cover-with-vents
Feel free to follow main post since all infos are there but basically you will need angled USB extension and decently thick wire to extend power switch (try to match thickness with original wire…)