Shelly Mini DIN-rail holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.29 – €1.58 net (excluding VAT)
For file: shelly_mini-g3_din-rail-hldr_0.2mm_PETG_MK3S_1h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.44 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.54 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of @FragileCobra_1676165 Shelly plus DIN-rail holders for Shelly Mini Gen3
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 923
- Makes
- 5
- Views
- 2,428
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As @FragileCobra_1676165 Shelly plus DIN-rail holders has no version for a Shelly mini, I made a remix of his model to have one.
On the bottom are two openings. (1) is to access the Reset Button of the Shelly mimi, (2) is designed to facilitate demounting the Shelly from the holder.
Print Instruction:
Layer Highth: 0,2
Infill: 15%
Supports: none
I used PETG, but other materials might work, too.
| Version | Date | Change log | Slicer |
| 1.1 | 28. Aug. 2024 | first publish | PrusaSlicer Version 2.7.4 |