1 / 4
Unicorn Piggy Bank!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-poly unicorn piggy bank with screw base. Print with special instructions below
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 96
- Makes
- 0
- Views
- 1,668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
3mf file has 3 parts: the screw cap, the base, and the unicorn.
Screw cap and base can print with standard/default settings, no support. The screw base may string a bit depending on your printer, and will likely need to be cleaned very slightly.
To print the unicorn as a hollow piggy bank:
Wall thickness 4
Top shell layers 0
Bottom shell layers 0 (this is very important to keep the hole at the bottom open)
10% infill using Lightning supports only! This will only support the top/coin slot
With supports of your choice