1 / 6
Modified Power cover with fused IEC plug with switch for (Un)original Prusa Heated Drybox — image 1
1 / 6

Modified Power cover with fused IEC plug with switch for (Un)original Prusa Heated Drybox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of the remix for (Un)original Prusa Heated Drybox power cover to fit a fused IEC power connector with switch.

Rating
5 / 5
Likes
7
Downloads
44
Makes
0
Views
190
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

See photos to compare adjusted part to original. With the adjusted position it's possible to use the IEC connector with fuse and switch.

The hole diameter is set to 4mm. Adjust the negative hole XY sizes (after unlocking the independent axis scaling) to match the diameter based on your heatsets inserts. For the blurolls kit 4.1mm is more ideal but I would not recommend using their heatsets.

The last photo shows how to bend spades to safely connect the switch. The PSU side ground and -V will need to be bent downward a bit, I suggest crimping that side and screwing in first to bend. The terminals on the IEC plug should not have to bend but the wire connectors will have to. Crimp and insert then use pliers to bend the wire back gripping at the crimp.

Tags