Travel box for Phillips Sonicare
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.70 – €6.97 net (excluding VAT)
For file: SonicareTravelBox_0.4n_0.2mm_PETG_MK4IS_5h12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.33 excluding VAT (range midpoint).
- Weight reported by the author
- 110 g
- Print time reported by the author
- 5.21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 88
- Makes
- 0
- Views
- 750
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser. Box is held together by a set of magnets 9x4.5x1.6mm glued in place. Joints are locked by two stainless steel pins 30mm x diameter 3mm (real diameter 2.9mm).
- Filament: Gembird PETG on Prusa MK4 using “PETG Prusament” profile.
- Infill: Gyroid - 30%; except joints where I recommend 100% infill.
- Supports: Off
- Avoid crossing perimeters: On - helps in reducing stringing.
BoM:
- 2x - Stainless steel pin diameter 3mm; length 30mm.
- 2x - Magnet 9x4.5x1.6mm
Both usually found in RC modeller shops or Aliexpress.
Do NOT heat-insert magnets, although it is tempting. You will demag them by heat! Use drop of PET compatible glue instead.
Enjoy!