1 / 3
LCR-T4 Part Tester Case (MTester)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since there are so many versions of the LCR-T4 tester and I wasn't able to find a fitting case on Thingiverse, I designe
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 203
- Makes
- 4
- Views
- 1,539
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In addition to the printed parts, you will need:
- 4x M3 Screws
- 4x M3 nuts
- 2x Small magnet (8x3mm)
You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little bit loose.
This is the tester I bought:
https://www.gearbest.com/boards-shields/pp_531727.html?lkid=13058651
I made a video about the tester and the case (in German):
https://youtu.be/apbzW4Rw1v4