Bullitt FidLock Vacuum Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for using the FidLock Vacuum ahead cap base with the Easy up of the Bullitt cargobike.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Use the adapter to connect the phone holder with the Easy up of the Bullitt.
Use the supplied screw and an M6 (locking) nut. You have to rise the handlebar clamp a few millimeters. When you secure the clamp you will automatically secure the adapter.
But be caution, make sure the handlebar clamp sits tight and secure on the steering tube. Its better for your safety if the adapter is a little bit loose and the clamp is tight.
When you tighten the screw of the phone holder mounting plate the lock nut shut push the material against the inner wall of the steering tube. Prescrew the locking nut for easy screwing if needed. A normal nut should work perfectly fine.
Printed from TPU (A98) with 1,2 mm walls. Print the area at the nut in full material. So the clamping mechanism works better.