1 / 8
Linear Snuff Accelerator v3 - Snuff Box - Schnupftabakschleuder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snuff box with build in catapult.
- Rating
- 4.333 / 5
- Likes
- 70
- Downloads
- 949
- Makes
- 4
- Views
- 6,147
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snuff box with build in catapult.
New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos).
I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.
Instructions
- Print the three parts.
- Sand the bolt and the inner channel of the top part until they are smooth.
- Sand down the sides of the bolt pin if necessary (depending on your printer it can be too wide and didn't fit in the slot).
- Put the bolt in the top part following by a spring.
- Put the snuff in the chamber of the top part.
- Close the top part with the bottom part.