X shot ragefire KAC chainsaw grip (OUTDATED)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You should probably use something else because this is jank as hell
- Rating
- 3.5 / 5
- Likes
- 23
- Downloads
- 149
- Makes
- 2
- Views
- 2,173
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This is not the most ergonomic solution, but it's still way better than the stock grip.
For this mod you will need: (4) M3x6 heat set inserts, (4) M2.6x12 toy screws, (2) cherry DB2 style microswitches, (4) M3x10 screws, (2) random springs to put in the trigger or the revtrigger (if your triggers are a bit sticky). This mod requires the ragefire to be rewired, so you should also consider that. wiring is very similar to a rewired nemesis (motor breaking is optional, but I'd certainly recommend it). Luke from Out of Darts has a great nemesis mod guide and there is also a wiring diagram in this video (if I remember it correctly). Some dremeling is required in order to make a wire channel and to make the grip itself fit (use the stock ragefire grip as a guide). I'd reccomend to print the grip with at least 3 walls and 30% infill.