JoyCon Straps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print serves as replacement for joycon straps.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 287
- Makes
- 2
- Views
- 3,176
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I've lost my JoyCon straps and found hard to find replacements online. So I designed a 3D printed replacement that works just as fine.
Print is provided with two design variants. One screwed, one glued.
You'll need a few aditional acces depending on which variant you are printing.
Screwed variant has holes for 2x12mm screws and 2mm hexagonal nut. You'll need 3 pairs.
Glued variant can be put together with superglue.
Printable without any supports but tested only with orientation presented in gcode file.
Be sure to sand inner sides of body parts so both body parts mesh without gaps.
Parts should be durable enough according to my testing and printing tolerances should be enough for most 3D printers.
Printable with any rigid material but dimensions are adjusted for 0.4mm nozzles.