1 / 1
Hue Forge Batman
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130x181.9mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA AzureFilm Black
PLA AzureFilm Basic Red
PLA AzureFilm White
You can use other filaments that you have just make sure color match
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #11 (0.96mm) swap to White for the rest.