Small Teacup Chinese Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Teacup with a plate in a Chinese Style
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a teacup with a teaplate.
It can be used as a cosplay prop, for example Uncle Iroh from Avatar: the last Airbender.
I put 2 versions of the teaplate, one which can be printed as a whole piece, and one made of two parts if you would like to print without support. The two plates are NOT the same design, but have similar ornaments on them and are nearly the same size.
If you print them with PLA, PETG or PP you can actually drink from them, just be careful not put really hot stuff in there, PLA filament will likely melt from temperatures above 50 to 60 degrees Celsius, PETG from 80-90 °C
PLEASE CHECK IF YOUR FILAMENT IS SAVE FOR PUTTING FOOD IN AND IS HEAT RESISTANT ENOUGH TO WITHSTAND TEA OR COFFE