1 / 2
xLCD cover for MMU on MK3.5 with labeling / xLCD Abdeckung für MMU für MK3.5 mit Beschriftung — image 1
1 / 2

xLCD cover for MMU on MK3.5 with labeling / xLCD Abdeckung für MMU für MK3.5 mit Beschriftung

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

xLCD cover for MMU on MK3.5 with labeling / xLCD Abdeckung für MMU für MK3.5 mit Beschriftung

Rating
0 / 5
Likes
5
Downloads
34
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

First of all, thanks to vojtz. for the model. 
A remix for the MK3.5. An MMU is required for printing. I got the best results with a 0.25 mm nozzle. The printing time on the MK3.5 with a layer height of 0.15mm and just under 3 hours is still within limits.
I recommend an elephant foot compensation of about half a nozzle width.

Print:
Material: PETG (black, grey, white, orange)
Filling density: 15% 
No support
Print upside down 

Happy printing!

If you like it, leave a like or post a make. I'm always open to suggestions for improvements or changes.

______________________


Als erstes Danke an vojtz. für das Modell. 
Ein Remix für den MK3.5. Für den Druck ist eine MMU erforderlich. Die besten Ergebnisse habe ich mit einer 0,25 mm Düse erhalten. Die Druckzeit auf dem MK3.5 mit einer Layerhöhe von 0,15mm und knapp 3 Std hält sich dabei noch immer in Grenzen.
Ich empfehle eine Elefantenfußkompensation in Höhe von etwa einer halben Düsenbreite.

Druck:
Material: PETG (schwarz, grau, weiß, orange)
Fülldichte: 15% 
Kein Support
Upside down drucken

Frohes Drucken!

Wenn euch das Ding gefällt lasst ein Like da oder postet ein Make. Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.

Tags