Fight Club Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AMS recommended, look in description for printing instructions.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 168.67x253mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Pink
At layer #15 (1.28mm) swap to Black
At layer #24 (2mm) swap to Pink
At layer #27 (2.24mm) swap to Gray
At layer #28 (2.32mm) swap to Jade White for the rest.