Nestable and Stackable Box (Vase Mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Finally a box that can be nested and stacked, depending on your current need.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 1
- Views
- 297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Finally I found the time to create a box that can be stacked and be nested depending on your needs. Store them away in a compact way if you don't need them and stack them if they're full. Low weight and quick print thanks to vase mode.
Print Settings
Print as many boxes scaled to your need. Use bigger or smaller nozzles depending on your scale. So far I did only print them on 100% scale with a 0.4mm nozzle without any issues
Set your printer to vase mode, all the other settings will be made by your slicer.
Generic advice for vase mode prints: use a big enough nozzle, use a filament you know well that has good layer adhesion and is well tuned for your printer. If you got issues with layer adhesion you might try some higher flow rates or slow down the speed.