Pixel 9 Pro XL Minimal Phone Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
0.8mm thick minimal phone case with camera bezel
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 291
- Makes
- 1
- Views
- 1,458
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is the final version of my “initial draft” i made the first day i got the phone. I wanted to use it for a week before publishing, and so far it's great. NO issues with it feeling loose after a week or uncomfortable in the hand. Buttons are marginally harder to press and haven't been any issue for me
https://www.printables.com/model/985339-pixel-9-pro-xl-minimal-case-initial-draft
I surrounded all ports and fixed the charging port area, no more large bridging sections. Made the base smaller. Gave the Camera Bezel a bevel to prevent glare, so you don't have to sand it down and/or color it black if you printed in a bright or reflective color
RECOMEND; =/>0.12mm layer height at the top for best overhangs and +/<0.16mm for bridging. *mouse ears for bed adhesion with ABS worked for me
I've printed it in PETG at 100% and ABS+ at 100.25% @0.12mm layer height or 0.16mm layer height for better bridging with Variable Layer Height for the bottom and especially top inner overhang. I kept the ABS+ printed parts on mostly for the color, i preferred the opaque white of the ABS). My guess is ASA would perform best, but i ran out of it.
Snaps on rather snug for best fit, so to get it on you have to roll on the last edge. Same with the Camera Bezel