NanoVNA-H4 Rugged Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A field box for the NanoVNA-H4, includes lots of room for jumper storage, BNC adapters, all calibration standards, etc.
- Rating
- 4.824 / 5
- Likes
- 159
- Downloads
- 1,341
- Makes
- 21
- Views
- 5,032
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in an accessory slot.
I printed the filler in TPU with 1 perimeter and 1 top/bottom layers with 5% gyroid infil to keep things “squishy”. As per the photos you can also print with no perimeters or top/bottom layers to get an “extra squshy” option but I didn't care for it.
As per the base design, use M3 x 30mm screws for the hinge and latches.