1 / 1
Adventure Force Desperado Spring Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will let you add 10, 20 or 30mm of spring compression to the Adventure Force Desperado to help increase performance
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 235
- Makes
- 0
- Views
- 865
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These files are not to be sold without my permission.
This will replace the existing post that holds the spring in the Adventure Force Desperado with a version that will have 10, 20 or 30mm of spring compression spacing. This works with the stock Desperado spring and I have also tested it with XYL Unicorn springs.
PRINTER SETTINGS
Infill: 20% (may want to go higher if using a stronger spring)
Layer Height: .20
Walls: 3
Supports: None