Filament Guide for Spools on a bar
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.52 – €0.63 net (excluding VAT)
For file: Proto_Filament_guide_v2_0.4n_0.2mm_PLA_MK4ISMMU3_35m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 34.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Filament Guide is a proto type I created to as I didn't find a version fitting my needs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
The filament guide is put on the same bar where the spools are mounted. (diameter of 19 mm)
The guide allows to fit in a PTFE tube.
It was created as the filament on my spools was entangling while printing.
I added the blender file in case you want to change something.
I used PLA with a 0.4 nozzle. It was printed with a MK4 MMU3 printer. I used brim, but I don't think it was really required. Printing time about 34 min.
Feel free to use.