Pharmacy Pill Counter Dish Cover Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement lid for a pharmacy pill counter. This model is for the Kirby KL1 lines of counters
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What:
These replacement lids are over 2 grand!!!! so I made my own. This model uses 8mm magnets and are press-fit into place. The top hole is for the screw. The screw should be tight enough where there is a slight friction on kicking the lid over to a locking position.
How:
This model was made in Onshape. You can access the CAD files here. The zip files include the pictures I took to assist me in CAD, but the extra files are also in the onshape file.
Why:
All most everything for the pharmacy market is overpriced. This file was designed for the purpose of offering a replacement part for almost nothing when compared to the OEM part.
Stats:
| Mass: | 23.14 g |
| Volume: | 17782.9 mm³ |
| Surface Area: | 13013.5 mm² |
Print Settings:
Important settings are marked with Orange
*All Settings are a suggestion but what it was designed for
| Raft/Brim: | No |
| Supports: | No |
| Layer Height: | 0.4mm |
| Nozzle: | 0.6mm |
| Infill: | 15% |
| Infill Type: | Gyroid |
| Material: | PETG |
I'm going to mark this under noncommercial.
CAD variable table
| Thickness | 3 | of overall part | |
| screwSize | 4 | ||
| Magnetsize | 8 | ||
| screwOffset | 6.4 | distance from top of lid to screw top hole | |
| screwtomagnet | 17 | distance from bottom of screw to top of magnet |