Thumper 1/8 - Seat FPV mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount to hold a FPV camera or AIO camera/VTX directly on thumper seat
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple mount to clic to seat. Position of a driver head.
Print with tree support, clip on the side to have layer adhesion perpendicular to small arms (see photo).
Best to print in PETG for flex and temperature of VTX.
Edit camera mount part to fit yours (mine is a all quanum AIO). Assemble both part with m1 screw. Flush with a tool if screw are too long to avoid scratching your seat.
May be compatible with other black crow model using same seat.
Update 10/14/2024 : added clip for eachine 1000TVL camera. Should work with all camera with 15mm “objective”