Akro Mils 30-220 Divider Remix
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: akro mils 30220 divider v4_0.15mm_PLA_MK3S_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 24.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Divider for common stackable plastic container
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This model prints flat and fast because it doesn't have the “bits” on either end. In order to secure it you'll want to print the STL at the following percentages to get a snug fit. I've provided additional percentages if you can't get it to fit--all tested. See the .3mf file for details.
X-Dimension: 100.5%. This increases the length to 172.58mm. Decrease as needed but it needs to be snug.
Z-Dimension (0.15mm layer heights):
- Snug: 142% (1.7mm)
- Looser: 129% (1.55mm)
- Loose: 117% (1.4mm)
Sample print settings to get the look pictured:
- 0 Top Layers
- 0 Bottom Layers
- Infill: Honeycomb 15%
- 3 Perimeters
Photos show sample printed with MK3S with Hatchbox Purple. Good luck!