Black Myth Wukong
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Black Myth Wukong Hueforge
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 1,368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #23 (1.04mm) swap to Blue Gray
At layer #30 (1.32mm) swap to Grey
At layer #35 (1.52mm) swap to White for the rest.
If you get the message with the floating regions when slicing... you can ignore this
If you want to resize, scale only x and y. Z must stay as it is