Ergonomic Lint Roller Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle for lint roller of max 100 mm length and min 36mm internal diameter
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
I bought lint roller refill on Amazon, and had the surprise that the internal diameter was slightly to small to fit with the Scotch Brite handle I had.
Here is a simple proposal, one part only.
The Freecad model is also provided.
Printing
Printed in PLA with 15% filling, PLA.
Nothing special in the settings, except that it has to be printed without support, but with brim.
Be cautious when removing the brim, the part is fragile. I recommend to first remove the external brim, then cut the notches without removing the internal brim, then remove the internal brim.