Sensorless EndStop Dummy M8
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dummy sensorless endstop, commonly used when you install sensorless drivers like TMC2209 / TMC2226.If you…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This is a dummy sensorless endstop, commonly used when you install sensorless drivers like TMC2209 / TMC2226.
If you don't want complicate with Marlin setup (X_MIN_POS / Y_MIN POS) this part could be that you need.
Simply align the nozzle with the bed edge and then, put the dummy sensorless endstop in the X axis (M8) against X carriage. (See the picture) It can be using in Y axis too.
Tighten the screws... BE CAREFUL!!... tighten the screws uniformly whit moderately pression to avoid part cracking... you only need that it doesn't move.
Filament: PETG
Screw: M3x12 Screw and 2 M3 Nut.
| Parameter | Value |
|---|---|
| Layer height | 0.2 |
| Wall loops | 4 |
| Top & Bottom Layers | 5 |
| Infill | 50% Gyroid You can change the Infill percentage if you want a strongest part... but it is not necessary. |
Please share if you print it...