1 / 2
Argon/welding regulator dust cover 5/8" BSP RH thread
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps keep dust from getting in your regulator
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I often store my regulator in a dusty area, so I made this cover to screw on the end to help keep dust/dirt from getting in. Most regulators do have a mesh screen inside but you still don't want any more dust than necessary getting in. This model is designed for regulators with a 5/8" BSP RH thread, which is standard in the UK and I think Australia/NZ too.
I'd advise printing this with some X-Y hole compensation, if your slicer supports it. I set mine to +0.25mm and it screws on nicely.