Spiral Vase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spiral vase made on fusion 360
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 288
- Makes
- 2
- Views
- 766
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Model Description
This is my first original model.
The smaller one in the photos is at the original size, while the larger one is scaled to 200%. Feel free to adjust the size as you wish.
This model is designed to be printed in vase mode with any nozzle size!
Print Instructions (For 0.4 mm nozzle):
- Vase Mode: Enabled (for any nozzle)
- Layer Height: 0.24 mm (optional)
- Extrusion Width: 0.7 mm (optional)
- Bottom Layers: 6 (recommended)
Vase mode prints only the outer walls, making the print faster, lighter, and free of seams.
Setting the layer height to 0.24 mm slightly speeds up the print without significant loss of quality.
The extrusion width of 0.7 mm strengthens the model, resulting in thicker walls.
Using 6 bottom layers increases the strength of the base, preventing it from detaching.
G-code
The uploaded g-code is for the Ender 3 V3 SE.
Print Time and Weight:
Normal Scale:
- Time: 1:03h (on the Ender 3 V3 SE)
- Weight: 10g (may vary depending on filament)
200% Scale:
- Time: 02:12h (on the Ender 3 V3 SE)
- Weight: 51g (may vary depending on filament)