1 / 5
IKEA FABRIKÖR Door Latch Lock Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the door lock on the IKEA FABRIKÖR.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 66
- Makes
- 0
- Views
- 723
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This latch replaces the original IKEA FABRIKÖR lock barrel assembly. It uses the original retaining clip and cam. Obviously it does not retain the keyed locking function.
The following parts will be needed to secure the cam:
- (1x) M2 x 3mm heat insert
- (1x) M2 x 7-8mm flat head screw
Printing Notes:
- Print inner portion with the flat side on plate (so that the long handle portion is facing upward). This provides additional strength.
- Print outer insert with large end on plate
- 90-100% infill is ideal.
- 0.16 layer height
- PETG or ABS is preferred, but I used PLA without issues (although I can't comment on longevity)
- No brim required