1 / 2
"Beware of the Dog!" Sign (Extreme Edition) — image 1
1 / 2

"Beware of the Dog!" Sign (Extreme Edition)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sign we attached to our entrance to keep visitors from just walking in.

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
455
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Design

The best way to print this sign is using a multi color printer like the i3 MK2 with MMU2. However, you can follow instructions like the one attached below to handle the filament changes manually.

Red and black colors are extruded into the white part by 0.4mm. So it is recommended to use a 0.2mm layer height to print this sign. 

PLA is fine, PETG lasts longer when used outside.

The model is roughly 125mm wide. In case you scale it, take care 0.4mm * scale factor is a multiple of your layer height. Scale factors like 1.5, 2.0, 2.5 etc are fine when using 0.2mm layer height.

Like for all multi color texts, print the sign with the front side down - this will give you a perfect surface.

Tags