IONIQ 5 Mount for Peak Design Mobile Slimlink Car Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for Peak Design's charging (and probably non-charging) car mounts.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 0
- Views
- 842
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This goes on the left side of driver's cluster on the metal/magnetic plate. I use MathyV's original hanging clamp as the basis, but modified the mounting features to accept Peak Design's Slimlink car mounts instead of the ProClip/Brodit series. The PD mount base slides into and snaps securely into the slot in this printed mount.
I incorporate a tilt to the right (i.e. toward driver, for left-hand drive configurations). You can simply mirror about the appropriate axis in your slicer for a right-hand-drive configuration.
I also added a few 10x3 magnet recesses for some extra grip on the panel, but the snap-fit mount is secure enough that they're not super necessary.
Finally, I include the IONIQ four-dot morse-code “H” flair, just for fun.
Note: Some destructive modification of the car mount is required – pry off the flexible plastic cover over the base of the mount's adhesive interface to reveal the actual, structural ~18mm x 18mm x 2.4 mm baseplate. Mine crumbled away in a few pieces. This may seem aggressive for an $80 mount, but trust me – it'll be worth it to have a secure, adhesive-free mount.
Print with automatic tree supports “on build plate only” for the unsupported overhang. Should separate easily.