1 / 4
Breadboard or jumper cable holder, Skadis compatible
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable holder for breadboard cables or jumper cables. Optional hooks to put this on a Skadis wall board included.
- Rating
- 4.667 / 5
- Likes
- 29
- Downloads
- 171
- Makes
- 3
- Views
- 848
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
You got breadboard cables lying around in an entagled mess? Me too.
This cable holder comes with twelve cable slots and four sections for different cable lengts:
- 80 mm
- 120 mm
- 160 mm
Put it on your desk or mount it on your Skadis wall board with the included hooks.
This was designed to be printed on a Prusa Mini.
My print configuration in Prusa Slicer:
- Layers at 0,2 mm structural
- infill 30%
- orientation: flat on the print bed, not upright!
- support on the printbed, applies only on to little spots
- some orange PLA
Material consumption:
- comb grids: around 10g each, 40g total
- rails: around 4g each, 8g total
- hooks: around 2g each, 4g total
Assembly:
- print 4 comb grids
- print 2 rails
- stick the combs onto the rails. I didn't use any glue, depending on the dimensional accuracy of your printer you should glue them together
- print 2 hooks, simply hang the assembly on the mounted hooks
Enjoy.