(Parametric) Wall-offset French Cleats for (Un)Original Prusa Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I like wall mounting my drybox with PTFE egressing the bottom rear beams -- this provides a better bend radius for PTFE
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 1
- Views
- 529
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a really simple modification of the existing french cleat system provided by the (Un)Original Prusa Drybox. (See Accessories here, the cleat and the bumper) This modification is just to distance the drybox off the wall by ~25mm to allow for better PTFE bend radii when channeling the PTFE through the bottom beams.
This remix also adds a 19mm parametric french cleat. Screencaps of how to adjust the screw holes in Fusion 360 for your stud distancing (for wall mounting) are provided.
You can use the original bumpers on the "non-rotating-bumper-offset.stl" to mount the bumpers in a ~25mm offset, like the mount points.
Printed in Overture PETG, .2mm@/4n, using .2mm Structural profile on MK4IS.