Towel Bar Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.72 – €4.55 net (excluding VAT)
For file: towel bar holder v3 v8_0.4n_0.2mm_PETG_MK4_4h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.14 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 4.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
holds the base plate of a towel bar
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The old towel bar that was attached to the wall by 3 screws broke, and the new one (made of stainless steel) came without screw holes and would not have fit to the existing holes in the tiles.
So I fired up Fusion 360 and went ahead to model an adapter that can be attached the wall using the existing screw holes and holding the base plate of the new towel holder with slots.
As the existing dimensions for the base plate (896mmx777mm) and screw holes most likely won't fit your requirements, I added the f3d-file, so you can change the parameters in the model according to your needs.
I used M4x40 metric screws and printed the model with 5 perimeters in Prusament Slate Silver PETG.
For increased strength, I suggest printing it upright with the non-slotted side upright, so you only need supports for the screw holes.