PicoNES Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heres a case I designed for the PicoNES PCB. Uses software for the Pico to emulate a NES. Information, software and…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Heres a case I designed for the PicoNES PCB. Uses software for the Pico to emulate a NES.
Information, software and PCB files are here: https://github.com/fhoedemakers/pico-infonesPlus
This case fits around the PCB with everything apart from the SNES controller port (if using PCB v0.2). The SD and HDMI breakout boards are not soldered flush but with pin header between (its about 2.5mm), the Pico is soldered flush. Works with original MicroUSB Pico and aftermarket USBC ones.
You'll need 4x m3 countersunk bolts to screw, 12mm minimum.
Note theres two different versions. PCB v0.2 is single player only, I kept the files as it has some more NES like design features such as the cartridge cover. PCB v2.0 is 2 player, with player 1 being the left most.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
**Rafts:**
No
Supports:
No
**Resolution:**
0.2
Infill:
20
Notes:
Printed in PLA, no supports needed. Make sure the first layer is good for the top!
Category: Video Games