1 / 4
Game Frame - PLAYSTATION - XBOX game / BLURAY Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang your games/movies to the wall
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 47
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this frame you can mount your favourite games or movies to the wall.
It provides a spindle to mount the disk and supports for the game's case, on the back a nail slot provides a way to mount the frame to the wall
Versions
Three files are available:
- An STL (FrameNotCut.stl) of the full model, without any cuts or connectors.
Print this if you have a print bed bigger than 167x355mm - A 3mf file (FrameCut.3mf), made with PrusaSlicer, of the model cut to correctly fit a standard 3d printer bed, including loops to connect the parts.
Print this if you have a standard (~220x220mm bed) 3d printer - A folder (FrameCut STLs), containing the files of the model cut to correctly fit a standard 3d printer bed, including loops to connect the parts.
Print this if you have a standard (~220x220mm bed) 3d printer and you don't use PrusaSlicer
I've always printed in PETG, because that's what I usually use, PLA is good too, but anything will work.
Print in neutral colours (black/white) for a minimalistic look
Print Time
~4h50m for the cut version, ~230g of material
Assembly (cut version)
Just lay the two parts close, use the loops to connect the parts as seen in the picture
