Harbor Freight Flag Pole Bushing for Starlink Wall Mount Tube
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.42 – €2.96 net (excluding VAT)
For file: Harbor Freight Flag Pole Bushing for Starlink Wall Mount Tube.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.69 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 3.25 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A bushing for the Harbor Freight 20' Flag Pole which would fit the tube from the Starlink Wall Mount Tube
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 39
- Makes
- 0
- Views
- 787
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had trouble finding a bushing for the Harbor Freight 20' Flag Pole which would fit the mast from the Starlink Standard Wall Mount kit, so I designed this one. It does not have the inside “ridge” that other bushings have. Before inserting this bushing you will need to remove the clear plastic cap on top of the pole. This bushing is a very tight fit into the end section of the Harbor Freight 20' Flag Pole. It may be necessary to get a block of wood and a rubber mallet to seat it completely. The mast from the Starlink Standard Wall Mount Kit fits very snuggly but can be removed by hand. The two set screws which held the original clear plastic cap in place can be reinserted giving it added strength.