Multi-Use Camping Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multi-Use: Clamp table cloth; Hold Recycle or Rubbish bag; Hold dish washing and drying cloths; Tie clothes drying line.
- Rating
- 5 / 5
- Likes
- 169
- Downloads
- 638
- Makes
- 1
- Views
- 2,433
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This clamp will hold a table cloth in place. Tie a knot in two trash bags and hang them in the slot for recyclables and rubbish. Or use the slot as a place for dish clothes (they may also need a knot). Tie rope or paracord for one end of clothes line. There are many uses for this Camping Clamp! There is 0.2mm clearance between the screw and the frame; this should work for most printers. Do not scale this model smaller as that can cause the threads to jam.
Don’t use PLA.
I used PETG, but tougher materials should work as well.
Suggest 4 perimeters, 20% infill.
A little support in the top of the threads in the frame will keep that hole round. You will see that support painted on in the Camping Clamp PROJECT.3mf file.
A little bit of light oil on the threads and the screw will turn smoothly. This clamp will work on tables up to 60mm thick.
I hope you like ❤ this model!
Happy Printing!!