Boom Arm Hookah Hose Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hookah hose holder designed for a boom arm microphone stand for hands free use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is a hookah hose holder I designed for a boom arm microphone stand. I wanted to be able to smoke and work with both hands free. I had an old neweer stand laying around so I designed it to fit on the threads on that, but I suspect they're pretty standard for the base screw, so it will probably work on other brands of boom arm. My hose is a d hose resin edition.
I printed with .2 mm layer height and I would strongly recommend you up the number of walls to 4 and probably do like 20 or 25 percent gyroid infill. My machine is able to print this part cleanly without any supports.
I have made these out of pla, petg, and now resin, and I would recommend using resin or abs if possible. The pla ones will last for a decently long amount of time, but they will eventually crack somewhere and you'll have to make a new one. Petg is the same story but generally lives for longer in my experience. The one I have made out of resin looks and feels like it's going to go forever.