Logitech C920/C270 Z camera mount for Prusa MK3/MK3S+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount for Z axis for Logitech C270/C920 models
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 51
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple mount for Logitech C270 or C920 camera.
The design comes with 2 parts:
- The main part which is to be mounted on the left Z stepper. It should fit Logitech C270 as is
- The C920 bracket to mount Logitech C920 camera on the C270 place
Print without support. I recommend to use at least 4 walls and 30% hex infill for better durability.
There is a small built-in support in the mount near the exit of the cable channel. This is easy to remove using a cutter.
BOM
- M3x12 to mount onto the left Z stepper
- Logitech C270 or C920 camera
- M3x20 + M3 heat insert or M3x24 + M3 nut
If this mount is used for Logitech C270, then you need to print prusa-camera-z part only. The c920-bracket part is an adapter to mount Logitech C920 instead of C270.
Logitech C920 needs to be disassembled using steps 1 to 5 as in the iFixIt manual. The metal supports need to be removed and inserted into the bracket.