DIY Swing Arm for CNC Dust Collection (Shapeoko)

To replicate this for your CNC, you will need the following:

• 3D Printed Fittings.
• 2 x ½" Threaded Black Iron Pipe (amzn.to/3XcirUP). Length as desired (For my 4x4 Shapeoko 5 Pro, I use 48" long pipes for the vertical and horizontal sections).
• 1 x ½" elbow (amzn.to/4e87MkS).
• 1 x ½" Cap (amzn.to/4gdOj4c).
• 8 x #12 Pan Head Screws (amzn.to/3XgJvCr) (do NOT use flat head screws, or you may crack the fittings).
• 2 x 1x12" velcro straps (amzn.to/3yV9reR).

1. Screw the bottom & top fittings onto the CNC table.
2. Insert the vertical pipe.
3. Screw the 90° elbow to the vertical pipe.
4. Screw the horizontal pipe to the 90° elbow.
5. Insert the two sliders with Velcro straps.
6. Screw the end cap:

7. Attach the dust hose with the velcro straps and into the dust shoe, and voilà!

Related models:

• Shapeoko HDZ Z-Stepper Gimbal Mount for 2.5-inch Dust Hose
• Dust Collection Adapters for 2.5-inch Hose