Tortilla Crimp V4 Modified
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Tortilla Crimp V4 that can be printed at 100% on a 220x220 bed.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 255
- Makes
- 0
- Views
- 1,270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification of the Tortilla Pocket Crimp v4 by Brannan Johnson.
Because the original model is designed as print-in-place, it is too big for my 220x220mm bed, so I modified it to print in multiple parts.
I have glued the hinge pin together with a some CA glue in the hollowed out section, but it works just fine without glue and it allows the 2 sides of the crimp to be took apart to help with cleaning.
I would recommend doing a test print of the hinge pin until it reaches about 30mm tall to make sure it slides into the holes perfectly, and adjust the size down slightly on the X and Y axis if it is too tight a fit.
I printed this in PLA+ at 0.2mm with a 0.4mm nozzle on my Ender 3 V3 KE without any supports.
I rolled up some sandpaper and sanded the inside of the hinge holes so they were smooth.