Mouse Shell / Case for Wired or Wireless Mouse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Fantech Venom II WGC2 mouse was just too heavy so i decided to made a case with 3d printed parts to made it lighter.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 576
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
UPDATE Now you got option to print a bigger shell, this one feel better on my hand than the narrow one. and turns out my hand fits more without the butt, but hey... use what suit you best
You would need 3 m3x8 screws and nut, you can do 6 but 3 is enough
and a rubber band if your usb dongle is loose.
PETG is probably preferable for the base, but i only have pla+
Set walls at 0.8mm or 4 wall counts if you're using 0.2 nozzle, you can use 1mm for sturdier frame. i use 10% infill you can use more or less like 8%.