SEWING MACHINE THREADCUTTER (X-ACTO #11 BLADE)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A threadcutter you can mount to your sewing machine. Uses #11 X-ACTO blades.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 0
- Views
- 464
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A 2 piece design, that requires:
-1 x #11 X-ACTO blade
-2 x M3x10 Screws
-2 x M3x20 Screws
-4 x M3 Hex Nuts
-Adhesive Velcro or 3M Command Strip
Print in supplied orientation, 100% solid. Requires no supports. Apply velcro to only “mountsideTALL.stl” only so you can replace blades.
I only tested this with brand name X-ACTO #11 Blades. I am not sure how precise these blades are made.
The blade doesn't need to be a perfect fit as the other side will clamp down & retain it. It should work even if the blade rattles. I included versions with extra clearance around the blade if the first file doesn't work.