1 / 3
Transport roller for e.g. EURO-box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Typical height of EURO box rollers was to big, so I have designed my own transport roller with a reduced height.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 121
- Makes
- 2
- Views
- 1,114
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The roller is built up by four printed connectors and wooden slats and can be customized to any size of boxes.
Part list:
- connector | quantity: 4
- countersunk screw ⌀3x15 (for wood) | quantity: 24
- hexagon nuts M6 | quantity: 16
- cylinder screws M6x15 | quantity: 16
- roller for interface 40x40 mm | quantity: 4
- wooden slats max. 17 x max. 36
Print instruction:
- material: PETG
- supports: partly required
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: recommended
Assembly instruction:
- deburr parts if needed
- insert hexagon nuts M6 to connectors
- allign connectors and wooden slats to the bottom of the box and ensure a clearance between box and connector of about 2mm
- connect parts using countersunk screws ⌀3x15 with caution to ensure holder do not crack
- assemble roller using cylinder screws M6x15
- start storage and sorting of all your stuff using movable EURO boxes