Elegoo Saturn 4 Ultra Drip Arm - UPDATED FOR 16K
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple arm that allows for dripping resin off after prints.
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 1,702
- Makes
- 8
- Views
- 4,553
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED - The new version has a slot cut out to fit the updated 16K build plate (the one with the ears) and I am including a mirrored copy in case you want it to hang in the other direction.
I built this remix up from scratch. I have included both the STL and step files, in case you would like to modify it yourself.
The original was a bit loose up top and so it didn't fully latch securely. I also wanted to shift the arm to the left some more, so that I could maximize the height of the print that would still fit OVER the vat while dripping. I think I maintained the same angle, if not a bit more, to make sure the resin can overcome the lip easily.
I recommend you print this with extra walls and infill to make sure it is strong and won't drop a build-plate into your vat. I am sure normal settings will be fine, but why take the chance?
(The photos show a curved edge-I have updated the file to remove this for a bit of added stability.)