Bug-A-Salt extended rail.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended rail for the Bug-A-Salt guns.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 104
- Makes
- 1
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I made this model after searching for rails for my bug-a-salt gun. The available rails were to short for what I wanted to mount and I also did not want an angled one.
It was inspired by this rail on Thingiverse but his rail also was to short for my needs. https://www.thingiverse.com/thing:5515807.
Print in the orientation it loads in. This is very important so the clips so nothing is directly perpendicular to the layer lines and makes it as strong as possible.
The overhanging portion of the rail goes towards the rear sight.
SETTINGS:
Supports are a must! 45 degree overhang angle using tree supports. Support blockers can/should be used to prevent supports on the clips. Only the rails need to be supported.
4 Walls
25% infill
Everything else is personal preference.