1 / 1
Hygromether / Thermometer frame 45 degrees
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't like the angle of the original so i modified it a bit
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 86
- Makes
- 2
- Views
- 203
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple mount for a thermometer. Fit may be slightly loose or slightly tight depending on the specific model, as tolerances between thermometers can vary. The long bridge in my case didn't need supports and printed fine.
Recommended Print Settings:
- PLA
- 0.2 mm layer height
- 10–15% infill
- 2 perimeters
Please post your makes! :)