Tripod for photography and camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, easy to print and durable 1/4" photography and camera tripod
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Hello
This is my first project. (Please bear with me)
Please read the description.
I needed a camera mount for the Ender 3 Plus printer, I didn't find a suitable one.
I wanted it to be rigid and adjustable, so I created my own design.
The height of the adjustment is about 14 - 20 cm.
I use it with a camera to monitor printing on the Ender 3 v3Plus printer.
I adjusted it so that it could be printed very easily.
The nut has a universal 1/4' photo thread.
I used a variable layer thickness. It was from 0.14 mm to 0.3 mm thick.
There is one base for the M20x2.5 thread.
There are 2 versions of the nut.
A version for a well-calibrated filament/printer,
and a version for weaker printers.
After printing, I made a few small changes to make everything connect better.
I recommend using grease/oil on the thread.
Happy printing and using!