1 / 3
Multi holder for MUJI cream tubes (10g)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold together multiple 10g MUJI toiletry tubes, for easier/cleaner transport of small creams.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Very likely you'll need to download the Fusion 360 file and adjust the tube diameter parameter base on the tolerances of your printer, filament … and the tubes themselves.
Design notes:
- 20mm height seems to be a good compromise between stability/snugness and leaving enough of the tube free to squeeze out contents.
- One potential improvement could be to add some vertical ridges inside the cylinders, to make the fit more resilient to slightly different diameters of tubes. Please post a remix, if you do this!